6K Install kit for Dometic DTU6 DTU8 ECD6K-HV 115v Marine Air Conditioning Units
Includes: Seawater Pump, Grilles, Ducts, Hardware
16K Install kit for Dometic DTU16 DCU18 ECD16KZ-HV 230V Marine Air Conditioning Units
The EasyTouch™ Dometic Marine Air Conditioner Display Control is Micro-Air's newest display control, and it employs the very latest microcontroller and TFT LCD technology. It has a user-friendly, 2.5" color, touch screen and is designed for use with direct expansion, reverse-cycle air conditioning systems or with chilled-water air handlers. EasyTouch has numerous unique features previously unavailable in any other control display in the marine HVAC industry.
Smart Start III Dometic Replacement Soft Starter 230v 50-60Hz 30-85ADometic Smart start II is discontinued and has been replaced by the Smart Start III. Prevents voltage spikes when starting, helps prevent power outages. Problem-free air conditioning start-up at moorings with low quality electrical circuit protection. Reduces startup surge by more than 60 %
Dometic Cruisair Marine Air Replacement SMXir Control Display/Keypad for DX applications.
The SMXir display/keypad has an smart, condensed housing with easy surface-mount installation. A large, easy-to-read LED displays cabin temperature, set point, programming prompts, and fault code warnings, and small LEDs and backlit text indicate system status. Under a attractive hinged door is the familiar 10-button arrangement with clearly labeled keys for single-keystroke operation.
Micro Air EasyStart™ Marine Air Conditioner Smart Start The most advanced & effective soft starter for all A/C applications! Direct replacement for Dometic, Cruisair, Marine Air, Smart Start II / Smart start III 115v/230v soft starters
FX-1 Control Display Direct Replacement for Dometic, Cruisiair, Marine Air Conditioner Control Displays
The FX-1 Control Display is Micro-Air's long-standing cabin control standard for both self-contained & split DX systems and for CW air handlers.
Micro-Air's FX Maxx Control Display is a Direct Replacement for Dometic, Cruisair, Marine Air Conditioning Systems
The FX-Maxx Control Display is Micro-Air's long-standing cabin control standard for both self-contained and split DX systems and for CW air handlers.
Micro Air's FX Maxx Control Display Designer Series is a direct replacement for Dometic, Cruisair, Marine Air Conditioning Units
The FX-Maxx Control Display Designer Series is a unique legacy offering only from Micro-Air. The Designer Series is functionally compatible with the standard FX-Maxx Control Display. It was originally introduced by request for high-end megayacht applications where decor and look were important. The closable door hides the control from view when not being adjusted.
Micro Air EasyTouch™ (8-Pin) is EQUIVALENT to Dometic Smart Touch Cabin Control at half the cost!
Micro Air Easy Touch marine air conditioner control displays are direct factory replacement displays for Dometic, Cruisair, Marine Air Systems units.
Micro-Air 402-IO Direct Replacement Dometic, Cruisair Marine Air Systems® Passport® I/O Control Display
Micro-Air ECU/AH-Maxx Control Display is a direct replacement for Dometic, Cruisair, Marine Air Conditioning Units
The ECU/AH-Maxx Control Display is part pf a DX/CW cabin control system sold during the mid-1990s. It supports the ECU-Maxx Control Board for DX applications, and the AH-Maxx Control Board for CW applications. The display interface utilizes the 8-conductor Amp® SDL cable (SUB-006).
SMXII-AB Direct Replacement Control Display Keypad for Dometic, Cruisair, Marine Air conditioning Systems
This is a Direct Replacement for Dometic Smart Touch Cabin Control Display. The same Display at half the cost! Need it to say Dometic buy the Display Programming cable.
Easy Touch Control Display Cover Plate/Bezel (gray)
This cover plate can be used on the EasyTouch™ Control Display, which accepts any Vimar™ Eikon or Eikon EVO style cover plate. The color is the classic Vimar gray, which exactly matches the color of the plastic housing of the EasyTouch.
Micro-Air Easy Touch Marine Air Conditioner Control Display Programming Cable
The EasyTouch™ Custom Logo Programming Cable allows anyone to customize their EasyTouch to show any graphical image on the EasyTouch screen while it is in sleep mode. The graphical image must be a bitmap file (.BMP) with proper pixel size and proportions. Micro-Air offers a free PC software tool that works with this programming cable that allows you to import and verify that the graphical file you have chosen will work properly, and then downloads it to the EasyTouch.
© Copyright 2019 - Marine A/C Parts